Page 1 of 1

Super Soldier Disrupter

Posted: Thu Aug 07, 2014 10:31 pm
by SG Merc
Just received a screen used Super Soldier (Kull Warrior) disruptor from SG-1. This is the P90 attachment made by Sam Carter to fight Anubis' Super Soldiers. Here is a photo of the prop, along with some action shots from Season 8's Avatar.

Image

Image

Image

Re: Super Soldier Disrupter

Posted: Sun Apr 24, 2016 12:52 am
by SG Merc
Finally got around to making the molds for this prop. The first part (the red module) is already molded and I'm about 70% finished with the carrier and disruptor.

Have cast a few of the modules in red, and they are looking great. Will post photos soon.

Re: Super Soldier Disrupter

Posted: Sat Sep 10, 2016 1:25 pm
by SG Merc
First resin casts are done! The emitter is cast in resin, and the removable red energy module is translucent red.

These are getting painted within the next few days, and more photos will be coming. In the meantime here are some shots of the raw casts. There is very little cleanup needed since these are cast under pressure to eliminate all air bubbles in the resin.

If you want one for your P90 just let me know!

Re: Super Soldier Disrupter

Posted: Wed Sep 21, 2016 11:06 pm
by Jackknifeau
Do these attach to 20mm pict railing ??

Re: Super Soldier Disrupter

Posted: Mon Sep 26, 2016 7:02 am
by walkingstranger
I'd be down for one of these, depending on the cost.

Re: Super Soldier Disrupter

Posted: Wed Sep 28, 2016 2:10 pm
by SG Merc
Jackknifeau wrote:Do these attach to 20mm pict railing ??
Yes, they will fit that Picatinny rail.
walkingstranger wrote:I'd be down for one of these, depending on the cost.
I am selling these for $65 fully finished (plus shipping). Will be offering a light up option at some point, which will cost more.

Re: Super Soldier Disrupter

Posted: Wed Sep 28, 2016 5:02 pm
by SG Merc
Order form is now online. Click here. If you want to order other stuff as well then send me a message.

Kit version: $45
Finished prop: $65
P90 mounting kit: $5

Re: Super Soldier Disrupter

Posted: Sat Oct 01, 2016 10:23 pm
by Stitch
We are working on some new fancy con safe P90's so this maybe option to add to those more to come! Will be about 90 days for R&D...

Re: Super Soldier Disrupter

Posted: Sat Oct 15, 2016 7:32 pm
by walkingstranger
Purchased :)

Re: Super Soldier Disrupter

Posted: Sun Oct 16, 2016 12:23 am
by SG Merc
walkingstranger wrote:Purchased :)
Outstanding! Will get one sent your way 8)

Re: Super Soldier Disrupter

Posted: Sat Nov 12, 2016 12:09 am
by SG Merc
Painted up and ready to mount on a P90.

Image

Image

Image

The prop department designed these for use on the left side of the P90. As such you will need to add a second side rail to your P90. The rail can either be screwed in place (requires drilling into the receiver) or mounted with glue or epoxy.

Re: Super Soldier Disrupter

Posted: Sat Jan 21, 2017 3:27 am
by walkingstranger
Finally got around to getting a friend to pose for a action-less action shot of mine attached. Pardon the potato quality of the picture.

Image

Re: Super Soldier Disrupter

Posted: Mon Jan 23, 2017 12:58 am
by SG Merc
GREAT setup! The Kull Killer looks great if I may say so myself.